Matrox X.MIO3 FH
Matrox X.mio3 FH는 하드웨어 기반 비디오 처리 기능을 갖춘 멀티 채널 SDI I/O을 제공하는 하프 길이의 PCI Express 보드입니다.이 보드는 SD에서 4K 까지의 해상도를 지원하며 최대 12개의 입/출력 포트를 변경할 수 있는 SDI I/O를 제공합니다. 또한 다양한 외부 기기와 연결 할 수 있는 AES/EBU, LTC 및 GPIO 제공합니다. 멀티 채널 하드웨어 프로세싱은 4K를 포함한 모든 해상도에서 모션 어댑티브, 디인터레이싱, 업/다운/크로스 스케일링 및 믹싱/합성 등의 연산 집약적인 작업을 가속화합니다.X.mio3 FH는 고급 채널-인- 박스 시스템, 비디오 서버, 방송 그래픽 시스템, 인코더, 트랜스 코더, 멀티 뷰어, 스위처 및 기타 디지털 미디어 장비를 제작 개발 하는 OEM에게 이상적인 제품입니다. |
|
|
X.mio3 FH는 하드웨어 기반 비디오 처리 기능을 갖춘 멀티 채널 SDI I/O을 제공하는 하프 길이의 PCI Express 보드입니다.이 보드는 SD에서 4K 까지의 해상도를 지원하며 최대 12개의 입/출력 포트를 변경할 수 있는 SDI I/O를 제공합니다. 또한 다양한 외부 기기와 연결 할 수 있는 AES/EBU, LTC 및 GPIO 제공합니다. 멀티 채널 하드웨어 프로세싱은 4K를 포함한 모든 해상도에서 모션 어댑티브, 디인터레이싱, 업/다운/크로스 스케일링 및 믹싱/합성 등의 연산 집약적인 작업을 가속화합니다.X.mio3 FH는 고급 채널-인- 박스 시스템, 비디오 서버, 방송 그래픽 시스템, 인코더, 트랜스 코더, 멀티 뷰어, 스위처 및 기타 디지털 미디어 장비를 제작 개발 하는 OEM에게 이상적인 제품입니다.
Key features
System bus interface
• Single-slot PCI express Gen2 x8 bus
• Allows for multiple cards in a system
• Single slot all inclusive SDI, AES/EBU and LTC option
• BNC option available
Digital video inputs and outputs
• Reconfigurable inputs and outputs
• Serial digital component 4:2:2 video at 270Mbps in accordance with ST 259M (SD)
- 480i (NTSC) at 29.97 fps
- 576i (PAL) at 25 fps
• Serial digital component 4:2:2 video at 1.5 Gbps in accordance with ST 292M (HD)
- 1080i at 25, 29.97, and 30 fps
- 720p at 50, 59.94, and 60 fps
- 1080p/PsF at 23.98, 24, 25, 29.97, and 30 fps
• 3G SDI in accordance with ST 424M and ST425M-AB
- 1080p at 50, 59.94, and 60 fps
- 8 and 10-bit YUV 4:2:2
• Up to 12 10-bit 4:2:2 serial digital video inputs/outputs
- Up to 8 10-bit 4:2:2 serial digital video inputs
- Up to 8 10-bit 4:2:2 serial digital video outputs
• SDI inputs and outputs can be a video or key, where key inputs and outputs can be expanded and inverted
• UHD (Ultra HD) inputs and outputs
- 3840x2160p at 59.94, 50, and 60 (Quad mode and ST 425-5 Level A)
- 3840x2160p at 29.97, 25, 24, and 23.98
• Simultaneous input and output of different video standards
• Auto-detection of input video standard
• Video relay bypass for 4 inputs
• Independent horizontal and vertical timing presets for each video output
• Generic support of VANC
• Support for HANC packets (ST 12M-2 and ST 352)
• Proc amp controls at inputs
• Color space conversion at input (YUVA to RGBA)
• Color space conversion at output (RGBA to YUVA)
Built-in frame synchronizers
• Up to 8 frame synchronizers
• Corrects timebase of inputs to the genlock source
• 16 channels of audio resampling per input
• Can be optionally disabled Motion Adaptive Deinterlacer
• Pixel based operation
• Temporal and spacial-based motion estimation
• Anti-Aliasing filtering
• Telecine detection and film restoration
• Video over film detection
• Up to 4 channels of 1080i30 to 4 channels of 1080p60 processing
• 10-bit processing
Onboard scaler
• Pixel-based scaling, positioning, and cropping
• Down, up and cross scaling
• Downscaling of up to 8 channels of 1080i30
• Cross scaling of up to 4 channels of 1080i30
• Supports custom resolutions and broadcast resolutions up to UHD
• 8- and 10-bit surfaces
• YUV 4:2:2 and YUVA 4:2:2:4 surface formats
• Aspect ratio and colorimetry conversion between SD and HD
• Ancillary data conversion between SD and HD
Onboard compositor
• Programmable in single or multiple compositor configurations
• 8- and 10-bit video
• Up to 8 layers of 1080i30 compositing or 2 layers of UHDp60 compositing
• Full-blend and half-blend mixing
• Shaped or unshaped video compositing
• RGBA to YUVA color space conversion
• Logo input support with pixel-based positioning
In-line live video and audio mixers
• Up to 4 live mixers
• Zero frame delay
• 8- and 10-bit video
• Downstream mixing of live video with host buffers
• Mixing of 16 tracks of live audio with host audio
Genlock time base
• Analog blackburst reference (tri-level or bi-level) or SDI input as reference
• Optional latching termination
• VITC support on blackburst (ST 318M-A)
• Auto detection of genlock standard
Embedded audio inputs and outputs
• Supports up to 16 channels of embedded audio per SDI video stream in accordance with ST 272M A, B, and C (SD) and ST 299M (HD)
• 48 kHz sampling
• Supports 16-, 20-, and 24-bit audio streams
AES/EBU audio inputs and outputs
• 16-in/16-out unbalanced AES/EBU audio channels
• 48 kHz sampling
• 16-, 20-, and 24-bit audio streams are supported
• Not available with BNC option
LTC
• up to 8 unbalanced LTC inputs in accordance with ST 12M-1
• up to 8 unbalanced LTC outputs in accordance with ST 12M-1
• Not available with BNC option
RS422
• Serial interface control
GPIO Interface
• Active or Opto-coupled options
• 6 inputs, 2 outputs (other configurations available on request)
• Not available with BNC option
System bus interface
• Single-slot PCI express Gen2 x8 bus
• Allows for multiple cards in a system
• Single slot all inclusive SDI, AES/EBU and LTC option
• BNC option available
Digital video inputs and outputs
• Reconfigurable inputs and outputs
• Serial digital component 4:2:2 video at 270Mbps in accordance with ST 259M (SD)
- 480i (NTSC) at 29.97 fps
- 576i (PAL) at 25 fps
• Serial digital component 4:2:2 video at 1.5 Gbps in accordance with ST 292M (HD)
- 1080i at 25, 29.97, and 30 fps
- 720p at 50, 59.94, and 60 fps
- 1080p/PsF at 23.98, 24, 25, 29.97, and 30 fps
• 3G SDI in accordance with ST 424M and ST425M-AB
- 1080p at 50, 59.94, and 60 fps
- 8 and 10-bit YUV 4:2:2
• Up to 12 10-bit 4:2:2 serial digital video inputs/outputs
- Up to 8 10-bit 4:2:2 serial digital video inputs
- Up to 8 10-bit 4:2:2 serial digital video outputs
• SDI inputs and outputs can be a video or key, where key inputs and outputs can be expanded and inverted
• UHD (Ultra HD) inputs and outputs
- 3840x2160p at 59.94, 50, and 60 (Quad mode and ST 425-5 Level A)
- 3840x2160p at 29.97, 25, 24, and 23.98
• Simultaneous input and output of different video standards
• Auto-detection of input video standard
• Video relay bypass for 4 inputs
• Independent horizontal and vertical timing presets for each video output
• Generic support of VANC
• Support for HANC packets (ST 12M-2 and ST 352)
• Proc amp controls at inputs
• Color space conversion at input (YUVA to RGBA)
• Color space conversion at output (RGBA to YUVA)
Built-in frame synchronizers
• Up to 8 frame synchronizers
• Corrects timebase of inputs to the genlock source
• 16 channels of audio resampling per input
• Can be optionally disabled Motion Adaptive Deinterlacer
• Pixel based operation
• Temporal and spacial-based motion estimation
• Anti-Aliasing filtering
• Telecine detection and film restoration
• Video over film detection
• Up to 4 channels of 1080i30 to 4 channels of 1080p60 processing
• 10-bit processing
Onboard scaler
• Pixel-based scaling, positioning, and cropping
• Down, up and cross scaling
• Downscaling of up to 8 channels of 1080i30
• Cross scaling of up to 4 channels of 1080i30
• Supports custom resolutions and broadcast resolutions up to UHD
• 8- and 10-bit surfaces
• YUV 4:2:2 and YUVA 4:2:2:4 surface formats
• Aspect ratio and colorimetry conversion between SD and HD
• Ancillary data conversion between SD and HD
Onboard compositor
• Programmable in single or multiple compositor configurations
• 8- and 10-bit video
• Up to 8 layers of 1080i30 compositing or 2 layers of UHDp60 compositing
• Full-blend and half-blend mixing
• Shaped or unshaped video compositing
• RGBA to YUVA color space conversion
• Logo input support with pixel-based positioning
In-line live video and audio mixers
• Up to 4 live mixers
• Zero frame delay
• 8- and 10-bit video
• Downstream mixing of live video with host buffers
• Mixing of 16 tracks of live audio with host audio
Genlock time base
• Analog blackburst reference (tri-level or bi-level) or SDI input as reference
• Optional latching termination
• VITC support on blackburst (ST 318M-A)
• Auto detection of genlock standard
Embedded audio inputs and outputs
• Supports up to 16 channels of embedded audio per SDI video stream in accordance with ST 272M A, B, and C (SD) and ST 299M (HD)
• 48 kHz sampling
• Supports 16-, 20-, and 24-bit audio streams
AES/EBU audio inputs and outputs
• 16-in/16-out unbalanced AES/EBU audio channels
• 48 kHz sampling
• 16-, 20-, and 24-bit audio streams are supported
• Not available with BNC option
LTC
• up to 8 unbalanced LTC inputs in accordance with ST 12M-1
• up to 8 unbalanced LTC outputs in accordance with ST 12M-1
• Not available with BNC option
RS422
• Serial interface control
GPIO Interface
• Active or Opto-coupled options
• 6 inputs, 2 outputs (other configurations available on request)
• Not available with BNC option
100 Class
- Does not have software codec, or software effects.
XMIO3/X2/100 - 12 reconfigurable video I/O (8 inputs and 4 outputs or 4 inputs and 8 outputs)
XMIO3/8/100 - 8 reconfigurable video I/O, can be upgraded to 12 I/O
XMIO3/6/100 - 6 reconfigurable video I/O, can be upgraded to 8 or 12 I/O
XMIO3/4/100 - 4 reconfigurable video I/O, cannot be upgraded (This product has 1 audio and LTC internal cable built-in on the main bracket of the board)
500 Class
- Includes DV25, DV50, MPEG-2 I-Frame 422/4224 codec, D10 codecs, MPEG-2 IBP codec(422/420 Main Level and High level), HDV, DVCPRO HD, AVC-Intra, XAVC, H.264 encoding and decoding (422/420 8bit and 10bit), and software effects.
XMIO3/X2/500 - 12 reconfigurable video I/O (8 inputs and 4 outputs or 4 inputs and 8 outputs)
XMIO3/8/500 - 8 reconfigurable video I/O, can be upgraded to 12 I/O
XMIO3/6/500 - 6 reconfigurable video I/O, can be upgraded to 8 or 12 I/O
XMIO3/4/500 - 4 reconfigurable video I/O, cannot be upgraded (This product has 1 audio and LTC internal cable built-in on the main bracket of the board)
550 Clase
- Includes codec and effects in 500 class plus ProRes codec.
XMIO3/X2/550 - 12 reconfigurable video I/O (8 inputs and 4 outputs or 4 inputs and 8 outputs)
XMIO3/8/550 - 8 reconfigurable video I/O, can be upgraded to 12 I/O
XMIO3/6/550 - 6 reconfigurable video I/O, can be upgraded to 8 or 12 I/O
XMIO3/4/550 - 4 reconfigurable video I/O, cannot be upgraded (This product has 1 audio and LTC internal cable built-in on the main bracket of the board)
100 Class
- Does not have software codec, or software effects.
XMIO3/X2/100 - 12 reconfigurable video I/O (8 inputs and 4 outputs or 4 inputs and 8 outputs)
XMIO3/8/100 - 8 reconfigurable video I/O, can be upgraded to 12 I/O
XMIO3/6/100 - 6 reconfigurable video I/O, can be upgraded to 8 or 12 I/O
XMIO3/4/100 - 4 reconfigurable video I/O, cannot be upgraded (This product has 1 audio and LTC internal cable built-in on the main bracket of the board)
500 Class
- Includes DV25, DV50, MPEG-2 I-Frame 422/4224 codec, D10 codecs, MPEG-2 IBP codec(422/420 Main Level and High level), HDV, DVCPRO HD, AVC-Intra, XAVC, H.264 encoding and decoding (422/420 8bit and 10bit), and software effects.
XMIO3/X2/500 - 12 reconfigurable video I/O (8 inputs and 4 outputs or 4 inputs and 8 outputs)
XMIO3/8/500 - 8 reconfigurable video I/O, can be upgraded to 12 I/O
XMIO3/6/500 - 6 reconfigurable video I/O, can be upgraded to 8 or 12 I/O
XMIO3/4/500 - 4 reconfigurable video I/O, cannot be upgraded (This product has 1 audio and LTC internal cable built-in on the main bracket of the board)
550 Clase
- Includes codec and effects in 500 class plus ProRes codec.
XMIO3/X2/550 - 12 reconfigurable video I/O (8 inputs and 4 outputs or 4 inputs and 8 outputs)
XMIO3/8/550 - 8 reconfigurable video I/O, can be upgraded to 12 I/O
XMIO3/6/550 - 6 reconfigurable video I/O, can be upgraded to 8 or 12 I/O
XMIO3/4/550 - 4 reconfigurable video I/O, cannot be upgraded (This product has 1 audio and LTC internal cable built-in on the main bracket of the board)