Matrox X.MIO5 12G
Matrox® X.mio5 12G 보드는 HD 및 4K 워크 플로우를 위한 다중 채널 구성이 가능한 12G/3G/ SDI I/O을 제공합니다. 또한 X.mio5 12G 보드는 모션 적응형 디인터레이싱, 초기 스케일링 및 고밀도 4K 비디오 프로세싱을 위한 강력한 합성 엔진과 함께 온 보드 멀티 채널 HDR 변환 기능을 갖추고 있습니다. X.mio5 12G 보드는 다목적 고밀도 12G / 3G SDI 연결과 멀티 채널 4K 비디오 처리 기능의 강력한 조합을 제공하여 4K 워크 플로우를 HD 처름 매끄럽게 만듭니다. X.mio5 12G 카드는 현장에서 검증 된 견고한 Matrox DSX SDK가 지원되므로 신속한 응용 프로그램 개발 및 시스템 배포가 가능합니다.
Key features
|
|
Matrox® X.mio5 12G 보드는 HD 및 4K 워크 플로우를 위한 다중 채널 구성이 가능한 12G/3G/ SDI I/O을 제공합니다. 또한 X.mio5 12G 보드는 모션 적응형 디인터레이싱, 초기 스케일링 및 고밀도 4K 비디오 프로세싱을 위한 강력한 합성 엔진과 함께 온 보드 멀티 채널 HDR 변환 기능을 갖추고 있습니다. X.mio5 12G 보드는 다목적 고밀도 12G / 3G SDI 연결과 멀티 채널 4K 비디오 처리 기능의 강력한 조합을 제공하여 4K 워크 플로우를 HD 처럼 매끄럽게 만듭니다. X.mio5 12G 카드는 현장에서 검증 된 견고한 Matrox DSX SDK가 지원되므로 신속한 응용 프로그램 개발 및 시스템 배포가 가능합니다.
Key features
System bus interface
• Single-slot PCIe® Gen3
- Mechanically x16
- Electrically x8
• Half-length, full-height card
• Peer-to-peer transfers
IP interface
• 4 SFP cages (2 Dual SFP28 cages)
• 10 GbE IEEE 802.3ae (10GBASE-SR)
• 25 GbE IEEE 802.3by
(25GBASE-SR, 25GBASE-CR, 25GBASE-CR-S)
• IP encapsulations according to
- SMPTE ST 2110-10
- SMPTE ST 2110-20
- SMPTE ST 2110-21
. Inputs are asynchronous receivers (Type A)
. Outputs are narrow transmitters (Type N)
- SMPTE ST 2110-30
- SMPTE ST 2110-31
- SMPTE ST 2110-40
• Seamless protection (redundancy) according to SMPTE ST 2022-7
• Support NMOS framework for:
- IS-04: Discovery and registration
- IS-05: Connection management
• Telemetry for monitoring and diagnosis of IP end points
• Access to standard network stack available on operating systems
Video inputs and outputs
• Each flow is SMPTE ST 2110-20 compliant
• Each SFP28 is paired to offer primary and redundancy flows (SMPTE ST 2022-7)
• Each dual SFP28 in 25 GbE offers:
- Primary flows:
. 16x HD input and output flows
. 8x 1080p60 input and output flows
. 2x UHDp60 input and output flows
- Redundancy flows that mirror above throughput
• Standard broadcast resolutions:
- 720x486i at 29.97 fps (NTSC)
- 720x576i at 25 fps (PAL)
- 1280x720p at 50, 59.94, and 60 fps
- 1920x1080i at 25, 29.97
- 1920x1080p at 25, 29.97, 50, 59.94 and 60 fps
- 3840x2160p at 25, 29.97, 50, 59.94 and 60 fps
- 4096x2160p at 25, 29.97, 50, 59.94 and 60 fps
• 8- and 10-bit YUV 422
• Inputs and outputs can be fill or fill/key where key can be inverted and expanded
• Inputs allow full line rate capture to memory, allowing any bursty input to be captured
• Outputs can directly extract video resolutions from custom wide-resolution buffers for applications, such as broadcast video walls Audio inputs and outputs
• Each flow is SMPTE ST 2110-30 compliant conforming with Levels A, B, and C
• Up to 128 flows of simultaneous inputs and outputs on each SFP28
• Each dual SFP28 in 25 GbE offers:
- Primary flows: 128 input and output flows
- Redundancy flows that mirror above throughput
• Each flow can be 1 to 64 tracks with overall max of 1024 tracks per SFP28
• Audio flows are independent of video flows
• 48KHz sampling
Ancillary data inputs and outputs
• Each flow is SMPTE ST 2110-40 compliant
• Up to 32 flows of simultaneous inputs and outputs on each SFP28
• Each dual SFP28 in 25 GbE offers:
- Primary flows: 32 input and output flows
- Redundancy flows that mirror above throughput
Onboard scaler with HDR conversion
• Pixel-based scaling, positioning, and cropping
• Down, up, and cross scaling
• Up/Downscaling of 4 channels of 4K/UHDp60 or the equivalent, such as 32 channels of 1080i30
• HDR conversions:
- HDR to HDR
- SDR to HDR
- HDR to SDR
• Input/Output dynamic range and color gamut:
- SDR BT 709
- SDR BT 2020
- HLG BT 2100
- PQ BT 2100
- Sony S-Log3 S-Gamut3
• HDR conversion settings:
- Per ITU-R BT.2408
- Presets with user preference control for saturation and intensity
• Supports custom resolutions and broadcast resolutions
• 8- and 10-bit surfaces
• YUV 4:2:2 and YUVA 4:2:2:4 support
Motion adaptive de-interlacer
• Pixel based operation
• Temporal and spacial-based motion estimation
• Anti-aliasing filtering
• Up to 4 channels of 1080i30 to 4 channels of 1080p60 processing
• 10-bit processing
• Aspect ratio conversions between SD, HD, and 4K/UHD
On-board compositor
• Programmable in single or multiple compositor configurations
• 8- and 10-bit video
• Up to 4 layers of 4K/UHDp60 compositing or 32 layers of 1080i30 compositing
• Full-blend and half-blend mixing
• Shaped or unshaped video compositing
• Supports custom resolutions and broadcast resolutions
• Logo input support with pixel-based positioning
Decimation filtering
• Proxy generation of any I/O buffer
• Provides 1/2, 1/4, 1/8, or 1/16 decimation for preview/ multiviewing purposes
• Simultaneous capture of full resolution and decimated buffers from I/O memory
Colorspace conversions
• YUV/YUVA to ARGB from I/O to host memory
• ARGB to YUV/YUVA from host to I/O memory
Genlock time base
• Genlock over IP as per SMPTE ST 2059
• Best master clock algorithm for up to 4 grandmasters
• Analog blackburst reference (tri-level or bi-level)
• Optional termination switch for blackburst
• Auto detection of blackburst standard
Failsafe
• Watchdog circuitry
• Intelligent IP bypass
System bus interface
• Single-slot PCIe® Gen3
- Mechanically x16
- Electrically x8
• Half-length, full-height card
• Peer-to-peer transfers
IP interface
• 4 SFP cages (2 Dual SFP28 cages)
• 10 GbE IEEE 802.3ae (10GBASE-SR)
• 25 GbE IEEE 802.3by
(25GBASE-SR, 25GBASE-CR, 25GBASE-CR-S)
• IP encapsulations according to
- SMPTE ST 2110-10
- SMPTE ST 2110-20
- SMPTE ST 2110-21
. Inputs are asynchronous receivers (Type A)
. Outputs are narrow transmitters (Type N)
- SMPTE ST 2110-30
- SMPTE ST 2110-31
- SMPTE ST 2110-40
• Seamless protection (redundancy) according to SMPTE ST 2022-7
• Support NMOS framework for:
- IS-04: Discovery and registration
- IS-05: Connection management
• Telemetry for monitoring and diagnosis of IP end points
• Access to standard network stack available on operating systems
Video inputs and outputs
• Each flow is SMPTE ST 2110-20 compliant
• Each SFP28 is paired to offer primary and redundancy flows (SMPTE ST 2022-7)
• Each dual SFP28 in 25 GbE offers:
- Primary flows:
. 16x HD input and output flows
. 8x 1080p60 input and output flows
. 2x UHDp60 input and output flows
- Redundancy flows that mirror above throughput
• Standard broadcast resolutions:
- 720x486i at 29.97 fps (NTSC)
- 720x576i at 25 fps (PAL)
- 1280x720p at 50, 59.94, and 60 fps
- 1920x1080i at 25, 29.97
- 1920x1080p at 25, 29.97, 50, 59.94 and 60 fps
- 3840x2160p at 25, 29.97, 50, 59.94 and 60 fps
- 4096x2160p at 25, 29.97, 50, 59.94 and 60 fps
• 8- and 10-bit YUV 422
• Inputs and outputs can be fill or fill/key where key can be inverted and expanded
• Inputs allow full line rate capture to memory, allowing any bursty input to be captured
• Outputs can directly extract video resolutions from custom wide-resolution buffers for applications, such as broadcast video walls Audio inputs and outputs
• Each flow is SMPTE ST 2110-30 compliant conforming with Levels A, B, and C
• Up to 128 flows of simultaneous inputs and outputs on each SFP28
• Each dual SFP28 in 25 GbE offers:
- Primary flows: 128 input and output flows
- Redundancy flows that mirror above throughput
• Each flow can be 1 to 64 tracks with overall max of 1024 tracks per SFP28
• Audio flows are independent of video flows
• 48KHz sampling
Ancillary data inputs and outputs
• Each flow is SMPTE ST 2110-40 compliant
• Up to 32 flows of simultaneous inputs and outputs on each SFP28
• Each dual SFP28 in 25 GbE offers:
- Primary flows: 32 input and output flows
- Redundancy flows that mirror above throughput
Onboard scaler with HDR conversion
• Pixel-based scaling, positioning, and cropping
• Down, up, and cross scaling
• Up/Downscaling of 4 channels of 4K/UHDp60 or the equivalent, such as 32 channels of 1080i30
• HDR conversions:
- HDR to HDR
- SDR to HDR
- HDR to SDR
• Input/Output dynamic range and color gamut:
- SDR BT 709
- SDR BT 2020
- HLG BT 2100
- PQ BT 2100
- Sony S-Log3 S-Gamut3
• HDR conversion settings:
- Per ITU-R BT.2408
- Presets with user preference control for saturation and intensity
• Supports custom resolutions and broadcast resolutions
• 8- and 10-bit surfaces
• YUV 4:2:2 and YUVA 4:2:2:4 support
Motion adaptive de-interlacer
• Pixel based operation
• Temporal and spacial-based motion estimation
• Anti-aliasing filtering
• Up to 4 channels of 1080i30 to 4 channels of 1080p60 processing
• 10-bit processing
• Aspect ratio conversions between SD, HD, and 4K/UHD
On-board compositor
• Programmable in single or multiple compositor configurations
• 8- and 10-bit video
• Up to 4 layers of 4K/UHDp60 compositing or 32 layers of 1080i30 compositing
• Full-blend and half-blend mixing
• Shaped or unshaped video compositing
• Supports custom resolutions and broadcast resolutions
• Logo input support with pixel-based positioning
Decimation filtering
• Proxy generation of any I/O buffer
• Provides 1/2, 1/4, 1/8, or 1/16 decimation for preview/ multiviewing purposes
• Simultaneous capture of full resolution and decimated buffers from I/O memory
Colorspace conversions
• YUV/YUVA to ARGB from I/O to host memory
• ARGB to YUV/YUVA from host to I/O memory
Genlock time base
• Genlock over IP as per SMPTE ST 2059
• Best master clock algorithm for up to 4 grandmasters
• Analog blackburst reference (tri-level or bi-level)
• Optional termination switch for blackburst
• Auto detection of blackburst standard
Failsafe
• Watchdog circuitry
• Intelligent IP bypass